Record Power BM16 Instruction Manual Download Page 5

3. Record Power Guarantee

1.  INTRODUCTION
1.1

  We supply machinery through a network of dealers and authorised 

distributors and you should be aware that your contract of sale is with the 
retailer from whom you purchased this product.   

1.2

  If you are not satisfied with this product you should in the first instance 

approach the retailer from whom you purchased it.

1.3

  Customers have statutory rights to protect them and information on 

this can be found at the Citizens Advice Bureau or in such web-sites as that 
operated by the DTI (http://www.dti.gov.uk)

1.4

  Returning your guarantee card will speed up the claims procedure and 

can be very helpful as a proof of purchase should the initial receipt be mislaid 
or damaged. We recommend that this is returned as close to your original 
purchase date as possible.

1.5

 Correct installation, set-up, adjustment and routine maintenance of the 

machine are the responsibility of the end-user and problems arising from 
incorrect set-up, adjustment or maintenance are not covered by the terms 
of this guarantee. However support is available in the first instance from the 
retailer who supplied you and free technical support is available from Record 
Power on 0870 7701777 during office hours and from an extensive knowledge 
base on our website www.recordpower.co.uk. We also recommend those users 
who have not had suitable training in safe use of machinery should seek such 
training locally before using or attempting to set up and adjust any machinery 
(please contact your retailer for recommendations in your local area).

2.  GUARANTEE
2.1

  In addition to the above Record Power guarantees that for a period of 5 

years from the date of purchase the components of this product will be free 
from defects caused by faulty construction or manufacture. 

2.2

  During this period Record Power will repair or replace free of charge any 

parts which are proved to be faulty in accordance with paragraph 2.1 above 
provided that:

2.2.1

  You follow the claims procedure set out below;

2.2.2

  We are given a reasonable opportunity after receiving notice of the claim 

of examining the product. 

2.2.3

 If asked to do so by us you return the product to Record Power's premises 

or other approved premises such as those of the supplying dealer, for the 
examination to take place. 

2.2.4

  The fault in question is not caused by continuous industrial use, 

accidental damage, fair wear and tear, wilful damage, negligence on your part, 
incorrect electrical connection, un-approved modification, abnormal working 
conditions, failure to follow our instructions, misuse, or alteration or repair of 
the product without our approval.

2.2.5

  This product has been purchased by you and not used for hire purposes;

2.2.6

  This Guarantee extends to the cost of carriage incurred by you returning 

the product to Record Power as long as it is demonstrated that the defect falls 
within the terms of this Guarantee and you follow the claims procedure as  
outlined below;   

3.  CLAIMS PROCEDURE 
3.1

  In the first instance please contact the retailer who supplied the product 

to you. In our experience many initial problems with machines that are thought 
to be due to faulty parts are actually solved by correct setting up or adjustment 
of the machines. A good dealer should be able to resolve the majority of these 
issues much more quickly than processing a claim under the guarantee. 

3.2

  If the dealer who supplied the product to you has been unable to satisfy 

your query, any claim made under this Guarantee should be made directly to 
Record Power at the address set out at the foot of this Guarantee. The claim 
itself should be made in a letter setting out the date and place of purchase, 
and giving a brief explanation of the problem which has led to the claim. 
This letter should then be sent with proof of the purchase date (preferably a 
receipt) to Record Power. If you include a phone number or email address this 
will help to speed up your claim.

3.3  PLEASE NOTE

 that it is essential that the letter of claim reaches the 

address below on the last day of this Guarantee at the latest. Late claims will 
not be considered. 

3.4

  We will contact you once we have received your initial written claim.   If 

it is necessary to return the item, in most cases but subject always to clause 
2.2.5, we will arrange for collection or will provide freepost information to 
enable return depending on the weight and size of the product concerned. If 
the product is to be returned to us, we will agree with you in advance a Returns 
Number, to speed tracking of the claim and ensure the most appropriate 
method of return to you is used. 

4.  NOTICE

This Guarantee applies to all goods purchased from an authorised retailer of 
Record Power within the United Kingdom of Great Britain and Northern Ireland. 
This Guarantee does not confer any rights other than those expressly set out 
above and does not cover any claims for consequential loss or damage. This 
Guarantee is offered as an extra benefit and does not affect your statutory 
rights as a consumer. Additional written copies of this Guarantee can be 
obtained by writing to the address below. Please include a stamped and self 
addressed envelope for each copy of the Guarantee requested.

Record Power Ltd
Unit B, Adelphi Way
Ireland Industrial Estate
Staveley, Chesterfield
S43 3LS

 

5

Summary of Contents for BM16



















Reviews: