Record Power BM16 Instruction Manual Download Page 16 | Manualshive

Page: 16 / 18

Record Power BM16 Instruction Manual Download Page 16

12. Certificate of Conformity

EU Declaration of Conformity

Cert No: EU / BM16 / 1

RECORD POWER LIMITED

,

Unit B, Ireland Industrial Est.
Adelphi Way, Staveley, Chesterfield S43 3LS
declares that the machinery described:-

1.

Type:

Bench Top Morticer

2. Model No:

BM16

3.

Serial No .........................................................................

  Conforms with the following directives:-


Machinery Directive – 98/37/EC
Cert No. AM50033804-0001

Low Voltage Directive – 73/23/EEC and amendment 93/68/EEC
Cert No. AN50033803-0001

Electromagnetic Compatibility – 89/336/EEC and amendment 93/68/EEC
Cert No. AE50033808-0001

and conforms to the machinery example for which the
EC Type-Examination Certificate No. AN213343801/E2131308E01/R02033606

at: Am Grauen Stein, D-51105. Cologne, Germany

and complies with the relevant essential health and safety requirements.

Signed.........................................................Dated:

01/01/09

Andrew Greensted

Managing Director

«
...
14
15
16
17
18
»

Summary of Contents for BM16



















Reviews:

No comments