www.reconyx.com
24
Additional Camera Options
IR Mask
If you need to clean the IR Array window, the IR Mask™ is easily removed by
carefully inserting a small screw driver in the left or right side to pry it out.
Warning:
Be very careful not to scratch the IR Array window!
To replace the IR Mask™, carefully line up one side of the IR Mask™ with the IR
Array window. Then gently push on both sides until the IR Mask™ is completely
seated against the window, and snaps into both sides.
The windows covering the IR Array, lens, walktest indicator and light meter, may
all be cleaned with glass cleaner or water using a soft non-abrasive cloth.
NOTE:
The IR Mask may also be removed to slightly increase the night-time
illumination range. In addition, removing the IR Mask may make the
camera appear more like a utility or monitoring device, to blend in
better with the surroundings in which the camera is deployed.
High Humidity Environments
We recommend using the moisture absorbing “desiccant system” available from
RECONYX™. The desiccant system is designed to absorb moisture that may
get trapped inside the camera when the housing is opened in humid conditions.
It is not intended to absorb water if the camera is opened in a rain storm, for
instance.
The desiccant system can be used in any HyperFire™ camera. Additional
desiccant pellets are available for purchase at
www.reconyx.com
Security Series Hardware Options
There are many custom hardware options available to suit your particular
surveillance need (additional costs may be associated).
Custom camera hardware options available from RECONYX include…
RTI-350 Wireless Remote Trigger & Illumination Extender
Cellular Capability
External Power Connectors
Telephoto Lens (2X) – Standard on the SM750
Camouflage Housing
