29
6.2 Auto-Test
This function is disabled by default, and only will be functional in the safety code of Italy.
Short press the button several times until “Auto Test CEI 0-21” displays on the screen, press
and hold the button 3 seconds to activate “Auto Test”. After the auto test finished, short press
the button several times until the screen displays “Auto Test Record”, and hold the button 3
seconds to check the test result.
The auto test type will be chosen from “Remote” and “Local” before starting the auto test.
“Remote” is set as 1 by default, which only can be modified to “0” by sending an external
command and “Local” is set as 0 by default, which can be modified to 1 through operating
the button on the inverter. According to the requirements of the standard, the test has been
divided into three modes:
1) “Remote” set as 1, “Local” set as 0, then the test order is 59.S1，59.S2，27.S1，81>.S2，81<.S2;
2) “Remote” set as 1, “Local” set as 1, then the test order is 59.S1，59.S2，27.S1，81>.S1，81<.S1;
3) “Remote” set as 0, “Local” set as 1, then the test order is 59.S1，59.S2，27.S1，81>.S2，81<.S2.
Connect the AC cable, auto test will start after the inverter connected to the grid, see the
operation steps below:
The auto test will start when the correct test item is selected, and the test result will be
displayed on the screen when it finished. If the test success, it will display “Test Pass”,
otherwise will display “Test Fail”. After each item tested, the inverter will reconnect to the grid
and automatically start the next test item according to the requirements of CEI 0-21.
Remote Cmd
1
Select
Items
Wait
Wait
Wait
Wait
Wait
General
Settings
Auto Test
CEI 0-21
Main Windows
IPS Item
xxxxx
Test Record
If
Tested
Test Result
Display
Local Cmd
0
IPS Item
Test Null
Password
1111
Verify Ok
Password
1111
Setting
IPS Item
Test All
IPS Item
Testing
Test Pass/Fail
Short press(1s), switch window
Long press(3s), enter the
lower Menu
Summary of Contents for RCM-10-TP-D
Page 2: ...2 ...
