13
Anti-reverse version 2pcs / RS485 and DRED version 1pcs (This connector already
pre-installed inside the inverter).
②
RCM 4~12-TP-D
2pcs / RCM-15-TP
-D
3pcs / RCM 17~25-TP
-D
4pcs.
③
DRED version only (This connector already pre-installed inside the inverter).
Inverter × 1
Wall Bracket × 1
Expansion Bolt × 5
3Pin Terminal × 1 ①
PV Terminal × 2 ②
Figure 3-7 Packing list
3.4 Packing List
The package of the inverter includes the following accessories. Please check whether the
accessories in the packing box are complete at the first time when receiving the goods. See
Figure 3-7 for the packing list:
4. Product Installation
4.1 Selection of Installation Location
The RECOM RCM 4~25-TP-D series is designed with IP65 protection for indoor and outdoor
installations. When selecting an inverter installation location, the following factors should be
considered:
1) The wall on which the inverter is mounted must be strong and can withstand the weight of the
inverter for a long time.
2) The inverter needs to be installed in a well-ventilated environment.
3) Do not expose the inverter directly to strong sunlight to prevent the power derating due to
excessive temperature.
4) The inverter should be installed in a place with shelter to prevent direct exposure to sunlight
and rain.
5) Install the inverter at the eye level for easy inspection of screen data and further maintenance.
6) The ambient temperature of the inverter installation location should be between -30 ° C and
60 ° C.
7) The surface temperature of the inverter may reach up to 75 ° C. To avoid risk of burns, do not
touch the inverter while it’s operating and inverter must be installed out of reaching of children.
4.1.1 Recommended installation location of the inverter, as shown in Figure 4-1:
WiFi/GPRS(Optional)
AC Terminal × 1
Ground Terminal × 1
6Pin Terminal × 1
③
Note
Inspection
Report
User
Manual
Quick
Guide
User Manual× 1
Quick Guide × 1
Inspection Report × 1
①
Summary of Contents for RCM-10-TP-D
Page 2: ...2 ...
