HandKey II Installation and Operation Manual
Revision 2.0
Page 73
7. As prompted, repeat Step 5 twice so that 3 quality hand reads can be recorded by
the Hand Reader. Once the third read is complete the User Enrolled message
appears on the display.
In some cases the Hand Reader may require more than 3 hand reads. If this is the case,
simply repeat Step 5 as requested until the User Enrolled message appears on the
display.
8. After a short delay the Add User option reappears on the display.
9. Press
to exit command mode.
– or –
10. Press
to enroll another user. Repeat this procedure beginning at Step 3.
– or –
11. Press
to step to the Remove User command.
123
USER ENROLLED
NOTE
ADD USER
*NO YES#
5
#
*
