Mini SD card mobile DVR M602 user manual
up within each time period. The status of each time period will display at the bottom as well as
the overall plan from 0 to 24 hours.
CopyTo:
Used to copy the parameters of this channel to other channel so as to configure
quickly.
3.8.2.6 Expection Processing
The processing way of the system when there is any expection occurs.
Type:
Includes video loss, disk full (don’t set overwrite), disk error and video blind.
Buzzer:
Whether enable the buzzer when there is any specified expection.
3.8.2.7 Motion Detection
Channel:
Select the channel to be set up.
Sensi.:
Trigger the motion detection sensitivity. There are none, lowest, low, middle, high,
and highest options.
Area:
Blind:
On the setting interface of motion detection area, a small yellow box appears in
the middle of the area namely area setting box. Area creation: first move the
yellow box to the start position of the setting area, use the
【
FN
】
button on the
remote control (the yellow box and the red box can switch) to change it into small
red box (red box is the motion detection area); then press the direction buttons to
adjust the size of the area; when the area setting is complete, press the
【
FN
】
button, the motion detection area will be selected and saved, and the small red
box change into small yellow box. Maximum 4 blind areas can be set up. Use the
left mouse button to drag from the left upper corner to the right lower corner and
the area will auto generate. When the setting is complete, press the
【
OK
】
button
or click the right mouse button to exit and save.
Local Clear:
Move the yellow box to the start position (left upper) of the area to be
cleared. Press
【
FN
】
, it will change into a small black box (the area to be
cleared), local will be cleared. When the clear is complete, press the
【
OK
】
button to save and return to the setting interface of motion detection menu.
If press the
【
ESC
】
button, the clear operation will be invalid. Click the left
mouse button and drag from the left upper corner of the selected area to
the right lower corner. Click the right mouse button to exit and save.
All Clear:
Press the
【
MENU
】
button on the remote control to clear all areas of the
channel.
Select All:
Press the
【
VOIP
】
button on the remote control to select all areas of the
channel.
