45
44
3. Making sure the seat belt is
not twisted, route the seat belt
through the
forward-facing
belt path, then buckle seat belt.
4. Open the belt lock off and route
the shoulder section of the seat
belt up into the slot.
5. While pressing on one armrest
of the ProRIDE, remove slack
from seat belt. To help securely
tighten the ProRIDE, press
down on the other armrest and
remove any remaining slack
from the seat belt.
Repeat as needed until the
ProRIDE cannot be moved
more than
one inch (2.5 cm)
in
any direction on the belt path.
6. Close the belt lock off over
the shoulder belt by pressing
the arm down onto the webbing
and close the handle.
7. If your vehicle has a top tether
anchor, attach and tighten
the top tether as shown on
page 38.
NOTE:
You must use the
belt lock off with this belt
configuration.
3
4
6
5
FOR
W
ARD-F
ACING
- Non-Locking ELR Lap-Shoulder Belt Installation
Summary of Contents for ProRIDE
Page 2: ...B ...