22
To confirm the ProBOOSTER is properly fitted to your vehicle:
1. Place the child restraint system
onto the vehicle seat cushion
and slide it back toward the
vehicle seat back.
Both the seat base and seat
back of the child restraint should
fit as close as possible to the
vehicle seat.
2. If there are large gaps to the
vehicle seat back as shown,
you can move the fitment bar
to the
UP
position.
3. The fitment bar is used to fill the
gap between the vehicle seat
and allow the child restraint and
the vehicle seat for optimum
seat installation.
4. There should be a minimal
amount of gap between the
child restraint system and the
vehicle seat.
NOTE:
You many need to adjust or remove the vehicle’s head
restraint to allow the ProBOOSTER to fit properly against the
vehicle’s seat back. Refer to your vehicle owner’s manual for
information on how to operate this feature.
1
2
3
4
Summary of Contents for ProBOOSTER
Page 2: ...B...
