Rec Temovex G10125, User Manual

Page: 3 / 20

DESIGN & TECHNICAL NFORMATION
Air Handling Unit
Temovex Blue 4
REC Indovent AB, Box 37, SE-431 21 Mölndal, Sweden | +46-31-675500 | www.rec-indovent.se
3
Product description
Temovex Blue 4 is an air handling unit (AHU) fitted
in a cabinet. The unit is designed for the ventilation
of homes, offices, nurseries and other small
premises.
The Temovex unit should be installed in a heated
room, such as a scullery, laundry or similar.
The standard Temovex unit consists of a
counterflow heat exchanger, 2 fans, 2 filters, after-
heater, by-pass damper and a control system.
Positioning guide
1. Casing
2. Filter, exhaust
air (behind
inspection door)
3. By-pass damper
4. Fan, exhaust air
(backside)
5. Fan, supply air
6. Counterflow heat
exchanger
7. Filter supply air
(behind 2.)
8. Elevator device
9. Adjustable feet
10. Condensate
drain
11.Control panel
12.After-heater
1. Casing
Inside is the unit made of EPP (Expanded
PolyPropylene). The outside casing is made of
galvanised sheet metal with 30mm insulation. As a
standard, the side panels and the front are white
(powder paint). The front door has a magnetic strip
which keeps the door closed. The unit top has
sleeve connections made of EPP, where all ducts
are connected.
2. Exhaust air filter
G4, bag (art. No. G10125)
3. By-pass damper
The Temovex AHU has an automatic by-pass
damper which makes the air by-pass the heat
exchanger whenever heat recovery is not
necessary. The by-pass setting is adjusted on the
control panel.
4. Exhaust air fan
The unit has low-energy fan of EC type with
integrated overheating.
5. Supply air fan
The same type as exhaust air fan (see point 4).
6. Heat exchanger
The heat exchanger is a standard highly efficient
counterflow heat exchanger from Recair. The heat
exchanger is made of very thinny, pleated plastic
sheets and and the supply air and exhaust air sides
are completely sealed from each other. This is
important in order to avoid odours and other
contaminants from old air seeping through to fresh
air. The heat exchanger has no moving parts, which
eliminates wear.
7. Supply air filter
F7, bag (art. No. G10126)
8. Elevator device
The elevator device must unfasten to make it
possible to take out the heat exchanger for cleaning.
(See chapter "Maintenance & service").
9. Adjustable feet
The cabinet has adjustable rubber feet.
10. Condensate drain
The Temovex unit is fitted with a condensate drain
at the bottom of the unit. This should be connected
to a drain or fed to a floor drain.
11. Control panel
All settings for fan speed, after-heating, by-pass etc .
are made via the control panel and the AHU's
integrated control system.
If you have added optional parts to your Temovex
AHU, these functions, too, are set via the control
panel.
12. After-heater
Temovex Blue 4 is fitted with an electric after-
heater, 0.9 kW.
As an optional extra, a reinforced electric after-
heater, 1,8 kW, or a water coil (two different sizes)
for waterborne heating is offered. The heater is
integrated in the unit and settings are made via the
control panel.
In the case of a water coil, the water connections
are at the top of the unit, dimension DN12
.
The Temovex Blue 4 with water coil includes a two-
way valve and valve motor in the consignment from
REC.
11
1
2
3
4
5
6
7
8
9
10
12