- 9 -
Spool gun torch welding
This machine can be connected to a Spool gun. (the package does not include a spool
gun).
The use of spool gun is similar to that of MIG gun, except that the wire is fed through
the wire feeding mechanism of the spool gun itself. In the spool gun mode, the feeding
mechanism of the original machine does not work.
Select spool gun mode on the front control panel or turn on the
“
Spool gun
”
switch at
MIG mode.(This toggle switch near the
“
Mode
”
button). Aluminum welding is
supported in spool gun mode.
The MIG torch switch is on the front panel of the machine
Direct Current Electrode Positive (DCEP):The electrode
cable (MMA stinger, MIG gun) connected to the positive
(+) connector on the front panel, The workpiece is
connected to negative (-) connector by the work clamp
cable. Suitable for positive wire or stick electrode.
Direct Current Electrode Negative (DCEN):The
workpiece is connected to the positive (+) connector on
the front panel. The welding electrode cable (MMA
stinger, MIG gun, TIG Gun) is connected to the
negative (-) connector pole. Suitable for negative wire
stick electrode.
Solid Wire,Welding aluminum
Flux Cored Wire
Operation of LIFT TIG function
Please follow installation instructions to install the TIG torch and working clamp. In Lift TIG welding mode,adjust [7 Adjust
current] the welding amperage can be changed. The welding current range is 30A to maximum current 150A adjustment.
The TIG welding function is for thin workpiece welding or stainless steel welding. Use 100% Argon gas as shielding gas.
Connect the gas hose with gas tube on torch.
Connection of gas cylinder
（
Refer to 2.3
）
Connect the TIG torch on negative connector.
Connect the working clamp cable on positive connector.
Tungsten needle electrode contact workpiece arc striking
