- 6 -
2.2 MIG & TIG Torch Exploded Diagram
-TIG torch is not included in standard accessories
Torch nozzle 1 and contact tip 2 are consumables. Please change when needed.
2.3 Gas Shielded Welding Installation.
①
MIG Welding
The gas cylinder containing the carbon dioxide gas, mixture gas or argon gas must be tightly connected to the regulator
or flow meter must to tightly so that there are no gas leaks.
Connect a gas hose between the machine’s rear gas connector and gas regulator or flowmeter with the gas hose clamps
provided. Once again there must be no leaks.
②
LIFT TIG Welding
The regulator or flowmeter attached to the gas cylinder containing the argon gas is tightly connected with the gas tube on
torch so that there are no leaks.
2.4 MIG Spool Gun Installation.
It
is not included in standard accessories
1
Open the cover of the wire feeding disc, open the cover of the wire feeding wheel bin, and loosen the
pressure wheel of the wire feeding mechanism.
2
Send the welding wire to the wire feeding wheel (note that the wire feeding wheel matches the diameter
