Rebel TOOLS RB-1001, User Manual

Page: 42 / 179

42
EN
8. Under abusive conditions, liquid may be ejected from the battery.
Avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
9. Do not use damaged or modified batteries. Damaged or modified
batteries may behave in an unpredictable manner, resulting in
hazardous effects (ignition, explosion, personal injuries).
10. Ensure that the switch is in the OFF position before inserting the
battery. Inserting the battery into power tools with the switch on
invites trouble. Injury hazard.
11. Charge battery pack only at ambient temperatures b10°C
and +40°C. Store the battery in a dry location protected from cold
where temperature would not 40°C.
Charger use and care
1. Do not attempt to open or disassemble the charger. If the charger
has been dropped or is damaged in any way, stop using it and do
not attempt to repair it. Return the charger for repair to an authorized
service center or a qualified person, to avoid any danger to the user;
or discard it according to local laws.
2. Protect the charger against any heat source (e.g. direct sunlight
exposure, fire, heater) to prevent any damage to the charger.
3. Do not expose the charger to water, moisture and cold. Risk of
electric shock.
4. If the power cord or the plug becomes damaged, stop suing the
charger until it has been repaired by a qualified person. If the
supply cord is damaged, it must be replaced by the manufacturer
or its authorized service center, in order to avoid a hazard. Risk of
electric shock.
5. Only use the charger provided with the tool, or a same type or
same model charger to charge the battery. The use of other types
of charger increases the risk of electric shock, personal injury and
damage.
6. Never attempt to recharge non-rechargeable batteries. Explosion
hazard.