Rebel TOOLS RB-1001, User Manual

Page: 41 / 179

41
EN
11. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
12. Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Service
1. Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
Battery tool use and care
1. Do not attempt to open the battery. If the battery is damaged in
any way, stop using it and do not attempt to recharge it. Short-
circuit or electric shock or explosion hazard.
2. Protect the battery pack against any heat source (e.g. direct
sunlight exposure, fire, heater etc) to prevent any damage or
explosion hazard.
3. Do not expose the battery pack to water, moisture and cold. Risk
of electric shock.
4. In case of damage and improper use of the battery, vapors may be
released. Ensure proper ventilation and provide for fresh air to the
work area. The vapors can irritate the respiratory system.
5. Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
6. Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
7. When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.