23
I/O Connections
PTZ (Pan/Tilt/Zoom)
There are three methods for setting up PTZ functionality:
1.
Method 1 (Remote Control)
a)
Connect the RS485 control cable of the PTZ to the RS485A
and RS485B of the MDVR, connect the video cable to the
MDVR video input, and then power the PTZ.
b) Configure the PTZ setting corresponding to PTZ data under
the peripheral setup option to use the remote control to
control the PTZ.
2.
Method 2 (dedicated control unit)
a)
Connect the RS485 control cable of the PTZ to 3D control
keypad.
b) Connect the video cable to the MDVR video input to power
the PTZ and 3D keypad.
c)
Set keypad parameters corresponding to the PTZ.
Using a dedicated PTZ control unit may yield higher speed
and efficiency than the remote control.
3.
Method 3 (both the above)
•
Make the connections described for methods 1 and 2 to
enable PTZ functionality using both the remote control and
a dedicated control unit.
1
2
Summary of Contents for RVS-5520
