CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Installation Instructions Page 1
DO NOT
climb ladder without Stabilizer Bar or
Installation Straps installed. Serious injury or
death may occur if Stabilizer Bar and Installation
Straps are not installed.
1
3
2
Position bottom of stand 4-5 feet from base of tree.
1
One person will stand at the base of ladder with
his/her foot on the bottom rung while holding
installation straps. This will prevent tree stand from
sliding. Two people will stand at opposite ends of
tree stand, facing platform and slowly walk tree
stand upward using rungs of ladder.
2
As tree stand is being raised, the
person holding Installation Straps will
pull toward themselves to take up slack.
It will steady and ease the weight of
stand on the other two people. Continue
walking stand upward. Until Tree
Connection Brace is resting against
the tree.
3
NOTE:
Drawings are for illustration purposes only and may not depict actual product.
W A R N I N G
Stabilizer Bar and Installation Straps
MUST
be secured prior to climbing
the Ladderstand. Failure to comply
may result in serious injury or death.
W A R N I N G
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Slide the inner part of the Stabilizer Bar
into the outer part. Attach Stabilizer Bar
to the second rung of the Middle
Ladder Section with
1-M8x45mm bolt .
Insert the Adjustment Knob in the
Stabilizer bar at the proper adjustment
point to the tree.
4
O
B
S
4
S
O
45
45
PRIMALVANTAGE.COM/REALTREE
9
©2019 (rev. 1/19)
MODEL: RTLS-502
15 Ft. Two-man Ladderstand
