Insert Bottom Ladder
Section into sleeved end
of Middle Ladder Section .
Isert 1 - M6 Quickclip into
each sleeve.
Attach the Ratchet Straps on either side
of the top rear Tree Connection Brace
on the rear of the Platform Frames
(as shown above).
(See Ratchet Strap
Instructions for correct weaving).
Attach Installation Straps on either side
of the lower rear foot platform assembly (as
shown above).
(See Installation Strap
Instructions for correct weaving).
40
40
L
A
A
V
V
B
B
B
V
C
A
C
V
13
14
15
X
Insert straight end of Ladder
Section
into sleeved end
of Ladder Section
. Insert
1 - M6 Quickclip
V
through
the hole on the sleeve and
through the ladder sections
on each side of the ladder.
Close the quickclips to
secure the ladder sections
together.
Slide Top Ladder Section
A
into Yokes
L
and insert
1-M6x40mm Bolt
in each
side to secure. Make sure the
sleeves are pointing towards
the ground.
The Stabilizer Sleeve on Ladder
section B MUST be facing towards the tree.
12
12
13
14
15
MAKE SURE ALL BOLTS ARE
TIGHT BEFORE PROCEEDING
TO INSTALLATION
W A R N I N G
Rear View
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Assembly Instructions Page 6
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
X
W
W
G
G
W
H
X
NOTE
PRIMALVANTAGE.COM/REALTREE
9
©2019 (rev. 1/19)
60
MODEL: RTLS-502
15 Ft. Two-man Ladderstand
