background image

15’ TWO-MAN LADDERSTAND

MODEL: RTLS-502

Always Wear a Safety Harness with this Product 

Practice Using at Ground Level

Weight Limit: 500 lbs. (300lbs. For An Individual User)

Tree Size: 9”-18” diameter

SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT

Instruction and Safety Manual

Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO  80120

Every year serious injury or death can occur from hunting related accidents.

To ensure your safety, please 

COMPLETELY

 read and follow this safety manual

and 

ALL 

warning labels 

BEFORE

 assembling, installing or utilizing this product.

DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY

WARNINGS AND INSTRUCTIONS. IF YOU HAVE QUESTIONS, ARE UNSURE

ABOUT ANY INFORMATION OR NEED ADDITIONAL INFORMATION

CONCERNING YOUR PRODUCT, CONTACT OUR CUSTOMER SERVICE

DEPARTMENT AT 1-866-972-6168 OR VISIT 

WWW.PRIMALVANTAGE.COM/.REALTREE.

 KEEP AND MAINTAIN THIS SAFETY 

AND INSTRUCTION MANUAL IN A SAFE

LOCATION FOR FUTURE REFERENCE. 

W A R N I N G

G

X

F

E

D

J

Q

I

R

K

M

N

P

U

W

T

Z

O

S

L

H

9

©2019 (rev. 1/19)

R

AA

Y

Z

Summary of Contents for RTLS-502


















Reviews: