RealTrace RT100 V8BT, Manual

Page: 50 / 56

50
Using the "PetScan" software with the RT250BT
The "PetScan" application can be used alfo with the RT250BT* after activating the reader's
Bluetooth function.
The RT250BT is delivered with the function "time out" (2 min), which is activated to save energy. It
is advisable to adjust the automatic time out setting and to set it to 30 min or more. If you do not do
this, you risk having the reader turn off before a connecting has been made to the phone. Once
connected, the player will not turn off even if the "Time out" has not been changed, except when
exiting the program
or turning off the phone
.
To change the duration of the "Time out", you must load the utility program onto your PC which
you will find at the following link
:
The features described in the previous chapter are all compatible with the RT250BT, but the
writing distance for additional data on the chips is much shorter, i.e. around 3/4 cm instead of 7/8
cm with the V8BT or V8M.
In order to leave one hand free, a phone attachment accessory for the RT250BT has been provided.
Finally, be aware that in all cases, reading a chip can be performed by selecting the "Scan" key on the
main menu, or more conventionally, by pressing the play button on the reader in use.
* Only the RT250BT4 or BT2/4 versions work with the iOS "PetScan" program.
Earlier RT250BT2 versions can not work with iOS.
The RT250BT2, RT250BT4 and RT250BT2/4 versions work with Android. With Bluetooth 2,
the blue LED of the reader flashes quickly.
With Bluetooth 4 or BT2/4, the blue LED flashes slowly.
*******
****
*
http
s
://
www.swissplusid.com
/
downloads/
V8-Timeout.exe