RealTrace RT100 V8BT, Manual

Page: 24 / 56

24
Display message on reader startup!
Setting the reader power timeout!
Through its hardware design, the V8BT reader was intended to be easier to update, allowing
distributors and users to benefit immediately from upgrades that could better respond to
market demands.
Now you can customize your reader through your PC by connecting to the http:// links that
are listed below, but be careful:
The V8BT customizer that provides for customising the welcome message upon starting
the reader only works from version VM14_v05
V8BTTimeout, which can set the time before automatic shutdown, only works from
version VM14_v6
Please note that you may find the version of the program installed in your old version of
V8BT by reading the "Master Card Version V8BT" card that came with it (only distributors).
1 / Display message on reader startup (V8BT Customizer)
This message could be your company name, customer name, date of sale or other text of
your choice given that you have two 16-character lines.
Upon starting the reader, the V8BT displays the recorded message for 4 seconds
.
2 / Setting the reader power timeout. (V8BT timeout)
The use of a lithium/ion battery has provided a significant increase in the autonomy of the
reader (several thousand uses). Therefore, you can adjust the auto-power-off period as
required: 2, 5, 10, or 30 minutes or if you prefer, you can switch off the timeout altogether
(not recommended). This setting can be implemented the same way if Bluetooth is enabled.
For your information, the reader without auto-power-off, and with
Bluetooth enabled
works
for over 48 hours
How to benefit from these options.
1/Just load the program option you are interested in on your PC, using the following links:
2/ Connect the reader to the PC via USB cable
3/ Start the reader and open the program on the PC.
For the greeting:
http s ://www.swissplusid.com/downloads
/V8
-
Customizer.
exe
To set the power timeout
http
s
://
www.swissplusid.com
/
downloads/
V8-Timeout.exe