MARGIN
GUIDES
Stay within the yellow
box. Do not let text go
beyond, instead move
to the next column or
start a new page.
5
|
www.icrealtime.com
2A. INSTALLATION STEPS
Step 1
Measure and drill out the mounting holes and cable exit, if
necessary. Install the anchor screws into the mounting holes. See
Figure 2-1
Step 2
Thread the installation screws into the Mount
. See Figure 2-2.
Note
:
The mount shown is for example only. The mount is sold
separately.
Figure 2-1
Figure 2-2
Figure 2-3
Figure 2-4
Step 3
Thread in the collar adapter and secure with locking screw as
shown in.
Figure 2-3.
Step 4
Thread the cabling through the collar and base. Install the camera
to the collar adapter and secure with set screws. Installation of support
cable/ chain is recommended as well. See Figure 2-4.
