Realm BY03-VBP-WTR Instructions Manual Download Page 16

14

WARRANTY

This product is warranted for a 12 months period effective from the date of purchase
by the first user.

Damage and/or defects resulting from inappropriate use do not fall under the
warranty provisions.

We also disclaim all liability for any bodily injury resulting from inappropriate use of
the tool.

At the same time, no claim can be made on the warranty if the damage of the device
is the result of negligent maintenance or overload.

Definitely excluded from the warranty is damage resulting from fluid permeation,
excessive dust penetration, intentional damage (on purpose or by gross
carelessness), inappropriate usage (use for purposes for which the device is not
suitable), incompetent usage (e.g. not following the instructions given in the
manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not
exhaustive.

Acceptance of claims under warranty can never lead to the prolongation of the
warranty period nor commencement of a new warranty period in case of a device
replacement.

We reserve the right to reject a claim whenever the purchase cannot be verified or
when it is clear that the product has not been properly maintained (Clean ventilation
slots, carbon brushes serviced regularly, etc.).

Any transportation costs shall always be borne by the customer, unless agreed
otherwise in writing.

You can always obtain more information by the email

[email protected]

or at the number

888-899-1688

.

Summary of Contents for BY03-VBP-WTR


















Reviews: