Realm BY03-VBP-WTR, Instructions Manual, Page: 14 / 17

12
Maintenance
CAUTION!
Before working on the
pressure washer, disconnect the plug from
the power supply socket.
1. To ensure good performance, check and
clean the water inlet filter (Fig. 19).
Remove the filter and rinse with water to
prevent any foreign matter from clogging
the pump (Fig. 20).
2.
Clean the nozzle with the needle clean out
tool provided (Fig.21). Remove the spray
lance from the gun; remove any dirt from
the nozzle hole and rinse.
3. Remove additional debris by back flushing
water through the nozzle and spray wand.
To do this, place the end of your garden
hose (with water running) to the tip of the
nozzle, pushing water and debris out of
the back opening of the nozzle and spray
lance.
4. Keep the machine clean and let cooling
air pass freely through the machine vents.
5. To ensure an easy connection and that o-
rings do not dry up; the couplings should
be greased regularly.
Environmental protection
Old appliances contain valuable materials
that can be recycled. Please arrange for the
proper recycling of old appliances. Please
dispose
your old appliances using
appropriate collection systems.
Fig.19
Fig.21
Water
inlet filter
Fig.20
Needle Nozzle