16
GAS COMPONENT CONNECTION CHECKS
If the burner will not light or stay lit, please perform the following checks.
1.)
Make sure the electrode wire is completely and correctly connected.
2.)
Make sure that the igniter housing is unobstructed.
Clear any debris on top of the igniter housing and make sure there is no debris
between the igniter pin, thermocouple and the burner tube.
Back of
Electronic
Ignition
Igniter
Housing
Burner
Tube
Do not cover
housing
CORRECT
INCORRECT
Summary of Contents for Treviso Square C11842LP
Page 9: ...9 1 Install the AAA battery as shown in the diagram below ASSEMBLY INSTRUCTIONS...
Page 30: ...9 1 Installez la pile AAA comme indiqu dans le sch ma ci dessous INSTRUCTIONS DE MONTAGE...
Page 51: ...9 1 Instale la pila AAA como se muestra en el siguiente diagrama INSTRUCCIONES DE MONTAJE...
