12
4.)
Place lava rock by hand. DO NOT dump bag out into tray to avoid clogging the burner
with dust. Position the lava rock across the burn area to a level just covering the burner.
Make sure that you do not block the igniter housing with lava rock to ensure proper ignition.
ASSEMBLY INSTRUCTIONS
Lava Rock and Glass Filler Warning:
2.
Do not light or use this fire pit if filler is wet. Ensure filler is completely dry before lighting.
Intense heat can cause wet filler to explode and hit someone causing injury.
3.
Please keep away from the fire pit for at least 20 minutes during initial start-up as filler
could retain some moisture from manufacturing and shipping.
1.
Do not overfill the burner area with rock or glass filler. The depth of the filler should not be
more than one inch above the burner tube. Only Real Flame filler products have been
certified and tested by CSA for safe use with this Real Flame fire pit. Using other filler
material may result in increased popping/ and cracking or increased CO gas emission.
Igniter Housing
Summary of Contents for Treviso Square C11842LP
Page 9: ...9 1 Install the AAA battery as shown in the diagram below ASSEMBLY INSTRUCTIONS...
Page 30: ...9 1 Installez la pile AAA comme indiqu dans le sch ma ci dessous INSTRUCTIONS DE MONTAGE...
Page 51: ...9 1 Instale la pila AAA como se muestra en el siguiente diagrama INSTRUCCIONES DE MONTAJE...
