Figure (1) Remove valve modulating lead
from control valve.
Figure (3) Remove wing nuts from each of the
control valve holding brackets and remove
valve.
Figure (1) Remove 3 screws from top of
module.
Figure (2) Disconnect gas from control valve.
Figure (3) Remove wiring from the modular
box (When replacing wiring refer to owner’s
manual for correct wiring.)
Figure (2) Remove cover from module.
NOTE: This module is held in position with
double-sided tape and should be gently
forced upwards to release.
Removal of
Control Valve
Removal of
Millennium
Control Module
After carrying out service or
replacing parts, reverse the
above processes to reinstate
the components.
Prior to lighting ensure there
are no gas leaks.
Deluxe model only
Deluxe model only
24
