Pyrotech Inbuilt Installation Procedure
(continued)
Figure (3) Remove nylon grommets and put
aside carefully.
Figure (4) Remove three spacer bolts, and
loosen bolt in bottom right corner.
Figure (5) Support front glass as shown, and
remove fourth spacer bolt. Remove
front glass.
Figure (6) Remove box containing logset, and
unpack. Place the large log at the rear
of the burner just in front of the 2
square tabs on the log support panel.
Re-installation of glass panels is reverse of
above.
N.B: ensure that the roped edge of
the glass is fitted to the top.
Figure (7) Place the 14 large coals and 8 small coals
on top of the white ceramic blanket.
Ensure front row of coals are placed
10 - 12mm away from the front grille.
Figure (9) Place the 2 straight logs as shown
Figure (8) Place the 2 ‘Y’ shaped logs as
shown, the larger on the left.
Position the ‘Y’ end of the logs
towards the front of the heater.
PYROTECH INBUILT MODEL
NOTE:
Keep coals or pebbles clear
of burner rail.
7
