Operating instructions
Peristaltic Pump IP Series
In addition, as the hose has an indeterminate life and
due to the possibility of its breakage or deterioration,
the user is responsible for the prevention of a possible
(although most unlikely) incorporation of particles
from the hose into the product being pumped. This can
be achieved e.g. by means of filtration, a hose rupture
alarm or other means suitable for the respective process.
CIP cleaning
In the event of CIP cleaning, it is necessary to obtain in-
formation from the manufacturer about correct instal-
lation of the pump (a special installation is required)
as well as regarding the compatibility of the cleaning
agents with the pump hoses and the hydraulic connec-
tions.
Cleaning should be undertaken at the recommended
maximum temperature.
Direction of rotation/flow direction
Possible consequence: Material damage right through
to destruction of the unit.
- The pump’s direction of rotation in relation to the
desired flow direction must be checked prior to
every start.
Disconnect the pump from the mains
Possible consequence: Personal injury.
You may only carry out work on the pump after it has
previously been switched off and disconnected from
the mains.
Environmental influences
Possible consequence: Material damage right through
to destruction of the unit.
- The device is not suitable for outdoor operation
- Take suitable measures to protect the device from
environmental influences such as:
– UV rays.
– Moisture.
– Frost, etc.
!
!
!
!
6