Real Time Devices CMT106, User Manual

Page: 5 / 18

User's Manual
CMT106 IDE controller utilityModule 1 Real Time Devices USA, Inc.
Chapter 1
I
NTRODUCTION
This manual gives information on the CMT106 IDE Controller and Hard Disk Carrier
utilityModule. This module allows you to stack a 2.1 Gbyte 2.5 inch hard drive in your PC/104
system..
CMT106 IDE and Hard Drive Carrier utilityModule
The CMT106 utilityModule was designed to provide an IDE hard drive in the PC/104 stack to
support the Real Time Devices family of cpuModules and other standard PC/104 processor
modules.
Features
The following are major features of the CMT106 utilityModule.
•
Bus mode -- decodes IDE interface through the PC/104 bus for cableless operation
Jumper selection of primary or secondary IDE interface in bus mode
•
Primary -- IDE Interface at 1F0-1F7h, Interrupt 14
•
Secondary -- IDE Interface at 170-177h, Interrupt 15
Connectors
Connectors provided are:
• CN1: PC/104 Bus (XT)
• CN2: PC/104 Bus (AT)
• CN3: IDE hard drive
General Specifications
• Dimensions: 3.8 x 3.9 x 0.6" (97 x 100 x 16 mm)
• Weight (mass): 3.0 ounces (85 grams)
• 4-layer PCB
• Operating conditions: (not including drive)
• temperature: 0 - 70 degrees C
• relative humidity: 0 - 95%, non-condensing
• Storage temperature: -55 to +85 degrees C