Installation Step 6 - Check for Leaks:
After completing all
prior installation steps and making sure all hoses are securely
attached, you should perform each of the following filter related tasks
when a) initially installing the unit, b) each time you replace the unit’s
Inner Carbon Filter and c) any time the unit has not been used for 2 or
more days...
A. If you have not already done so, insert the filter as described under
Step 2 - Insert the Inner Carbon Filter. Be certain you have placed the
filter under running tap water for at least 3 minutes to flush away
any loose carbon particles, remove excess air and to otherwise prime
the water filter. Also be sure the Inner Filter Cover is screwed firmly
over the Inner Filter Cartridge.
B. With the Faucet Diverter Valve
still switched on and source
water still flowing into the unit,
confirm that there are no leaks
from any of the hose connection
points, the Inner Filter Cover nor
from anywhere else on the water
ionizer. This process will also
flush any remaining air from the
water filter.
C. If there are no apparent leaks,
replace the Outer Filter Cover
and temporarily plug the unit into
the proper electrical outlet as
described in Step 8 – Plug In the
Water Ionizer.
D. Press and hold the "Set" button continuously on the unit’s front
for at least 10 seconds to fully flush the filtration system and to
clear any message prompts about replacing the filter.
E. After fully installing and priming the Carbon Water Filter, if this is
the first time you’ve installed your water ionizer, unplug the unit and
proceed to Step 7 - (Optional) Wall Mounting Your Water Ionizer. If
instead you are simply replacing an existing filter, your finished simply
return to using your water ionizer normally.
Inner Filter
Cover
IMPORTANT
Outer Filter
Cover
NEED HELP CALL 1-888-601-5886
20
Owner’s Manual AquaIonizerPro.com Aqua Ionizer Deluxe Antioxidant Machine