Instructions for kit #B 1895
page 16
□
17. Glue and tape the Rear Roof to the Sides
and Attic Ceiling, lined up at the top and centered
side-to-side (1
1
/
2
” overhang).
□
16. Cut wide Stripwood (
3
/
32
x
7
/
16
) for the Side Trim. Hold
the Stripwood against the Side, lined up at the back edge and
bottom. Use the top of the Side and Front wall as a cutting guide
- cut the Stripwood with a fine-tooth saw (like the X-Axto razor
saw) Save the cutoffs for Dormer Trim
Cut a Side Trim pair for the other side too. Glue and tape the Trim
to the Sides
Step 16
Side Trim
Lined up at the bottom
Use the top of the wall as
a cutting guide
Detail of Trim
The bevel on the top of the Rear Roof
lines up with the front edge of the Side
This piece of tape keeps the
Rear Roof from slipping down
