INSTALLATION INSTRUCTIONS
(continued)
•
Note appliance gas type – Natural gas or ULPG. Should the appliance be the incorrect gas
type please contact the supplier.
•
Gas isolation valve is to be accessible and located outside the enclosure.
•
Ensure wiring to the appliance is protected and not creating a hazard.
•
Installers – Please ensure the installation and instruction manuals supplied with this
appliance are supplied to the customer and the customer is trained on how to operate the
appliance correctly.
•
Do not modify the appliance.
•
Do not exceed maximum rated pressures.
•
Appliance must be installed with gas installation code (AS/NZS5601.1-2013) and applicable
electrical installation code (AS3000).
•
Test for gas leaks prior to operating appliance.
•
Check gas pressures and adjust if incorrect.
•
Auxiliary switch locations. – Auxiliary on/off switches must located to enable viewing of the
fireplace operation.
•
Appliance must be supervised at all times during operation.
15
