The Caldor may be installed directly on the floor or on a raised combustible or non-combustible
base.
13
INSTALLATION
(Continued)
Hearth Extension Construction Configuration
A. Raised Base Installation
When installed with a more than 100
mm raised base, the upper and
lower angle, for the full width of the
floor protection, must be protected
50 mm horizontally and 50 mm
vertically (E) by a piece of sheet
metal (not included). Apart from
these two corners, the sheet metal
does not have to cover the rest of
the wall between the base of the
wood inbuilt and the floor.
More than 100 mm
In the case where (F) would be
equal to 100 mm, it is suggested
that the sheet metal between the
base of the zero clearance wood
inbuilt and floor be in one piece.
100 mm