Reaim BY-PW02-B2Z-060-02, Operator'S Manual, Page: 10 / 19

10
4. Take the spray wand and align the two tabs with your
trigger gun. Once aligned, push the spray wand firmly
into the trigger gun, twist counter-clockwise to lock into
place (Fig.5)
5. Insert the high pressure hose into the high pressure hose
connection beside the trigger handle. (Figs.6-7)
WARNING
！
Keep hose away from sharp
objects. Bursting hoses may cause injury.
Examine hoses regularly and replace if damaged.
Do not attempt to mend a damaged hose.
6. Connect the high-pressure hose to the base
unit by inserting the other end into the water outlet.
(Fig.8)
7. Put the trigger gun with spray wand assembly on the
gun holder. Your pressure washer is ready for use
(Fig.9).
Battery Pack Operation
The equipment is powered by a lithium-ion battery.
The battery pack is completely sealed and
maintenance free.
Battery Charge Level Indicator
The battery pack equipped with a push button for
checking the charge level, Simply press the push
button to read off the battery charge level from the
LEDs of the battery indicator:
·
All 4 lights flashing: Battery is full.
·
3 lights flashing: Battery charge level high.
·
2 lights flashing: Battery charge level is
decreasing .Stop Work as soon as possible.
·
1 lights flashing: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise
the battery’s service life will be greatly shortened.
NOTE : If the charge level button does not appear to
be working, place the battery pack on the charge