www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
7
69
-
41200
-
IM
-
AA
Remove the
factory mounting nut
. Mark
the windshield wiper location against the
shaft for reinstallation. Gently lift up on
the wiper arm while slightly twisting. The
arm should pop off the shaft.
Retain factory hardware.
Remove the
factory molding clip
on the
driver side connecting the molding to the
wiper cowl.
If molding becomes disconnected from
vehicle retain hardware.
Remove the
factory molding clip
on the
passenger side connecting the molding to
the wiper cowl.
If molding becomes disconnected from
vehicle retain hardware.
Locate the
x7 plastic clips
holding the cowl
to the body. Remove all the clips and set
aside. Gently lift up on cowling from the
engine bay side, while lifting pull towards
the front of the vehicle to disengage from
the windshield. Once disengaged from the
windshield, set aside in the engine bay.