www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
13
69
-
41200
-
IM
-
AA
Once complete, position the spring spacer
into the factory spring locator.
Raise the jack to seat the spacer and
spring assembly properly. Make sure to
bring the lower control arm into position
with the knuckle while raising the jack.
Once in position, put the bolt in place and
thread the nut on.
Do not tighten at this time.
Install the wheels and lower the vehicle to
the ground. Torque the lug nuts to the
wheel manufacturer
’
s specs.
Once on a level surface with the wheels
chocked, loosen
6
more bolts shown in
the picture to allow the suspension to
settle properly.
