www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
6
69
-
41200
-
IM
-
AA
***Parts shown in red for picture clarification only***
ReadyLIFT recommends all steps and procedures described in these instructions be
performed while the vehicle is properly supported on a two post vehicle lift with
safety jacks.
Otherwise, park vehicle on a clean flat surface and block the rear wheels for safety
with the parking brake engaged.
Disconnect the vehicle power source at the ground terminal on the battery.
Lock the steering wheel in the straight forward position with the column lock or
steering wheel locking device. Allow vehicle to cool before starting any work as you
will be working in the engine bay.
Raise the front of the vehicle and support with safety jack stands at each jack point
behind the lower control arms. Remove the front wheels.
Remove the
plastic bolt cover
from both
driver and passenger wiper arms. Remove
the mounting nut. Mark the windshield
wiper location against the shaft for
reinstallation. Gently lift up on the wiper
arm while slightly twisting. The arm should
pop off the shaft. Set aside.
Unplug the
washer hose
.
Front Install Instructions
