www.ReadyLIFT.com - Phone: (877) 759-9991
16
69-2070-IM-AA
Locate the ReadyLIFT strut spacer. Install
using the provided
M10 - 1.5 flange nuts
.
Torque to
30 ft-lbs
. Install the completed
strut assembly into the frame using the
provided
M10 - 1.25 flange nuts
. Do not
tighten at this time.
Raise the lower control up to the strut. In-
stall the strut hardware. Do not tighten at
this time. Raise the lower control arm up
to the frame and install the control arm
hardware. Do not tighten at this time. In-
stall the ABS harness clips to the lower
control arm.
Install the rear wheels and lower the vehicle to the ground. Torque the lug nuts to the
wheel manufacturer specs.
Jounce the vehicle to get the suspension to settle to the new ride height. Torque the
upper/rear lower control arm and trailing arms hardware to
125 ft-lbs
, the tie rod arm
at the frame to
100 ft-lbs
(final torque to be done by alignment technician), the upper
strut mount to
30 ft-lbs
, and the lower strut mount to
145 ft-lbs
.
Reconnect the battery ground terminal. Start the vehicle and turn the steering wheel
lock to lock and verify all clearances between tire, body and suspension components.
Adjust as necessary.
Have the vehicle alignment set to the recommended specs on the last page of this in-
struction booklet.
