www.ReadyLIFT.com - Phone: (877) 759-9991
14
69-2070-IM-AA
Install the ReadyLIFT strut extension to
the strut using the provided
M10 flange
nuts
. Torque to
30 ft-lbs
.
Install the completed strut assembly to
the frame using the provided
M10 flange
nuts
. Do not tighten at this time.
Raise the lower control arm and install the
lower strut using the
factory hardware
. Do
not tighten at this time. Install the tie rod
end to the knuckle using the
factory hard-
ware
. Torque to
45 ft-lbs
.
Install the wheels and lower the vehicle to the ground. Torque the lug nuts to the
wheel manufacturers specs.
Reconnect the vehicle power source at the ground terminal. Jounce the vehicle a few
times to get the suspension to settle to the new ride height.
Torque the upper and lower control arms to
125 ft-lbs
, the lower strut hardware to
145 ft-lbs
, and the upper strut hardware to
30 ft-lbs
. Move to the rear install.
