Reach All-In-One Server User Guide
Confidential
Shenzhen Reach Software Technology Co., Ltd
Page 7 of 24
As shown in the rear view of the integrated All-In-One Server, you only need to
connect the signal cables to the corresponding ports.
3.2 Power on and Running
In normal situation, power on the equipment after connecting the power cable to the
corresponding port at the rear panel, the LCD panel will display “Starting…”. Wait for 1
minute, when the All-In-One Server starts up automatically, the LCD panel will display
the current input definition, serial number, IP address, recording status and other
relevant information.
3.3 Configuration Instruction
3.3.1 Environment for software and hardware installation
√
Make sure that the server is on a stable flat surface.
√
Make sure the IP network connection is available. 100Mbps network or above. (1000M network
recommended).
√
Please install the Server according to the physical and electrical environment equipment
mentioned above.
√
Suggested configuration of the PC for the installation of RecPlayer:
z
CPU: Dual Core Processor 2.2Ghz or above
z
DISPLAY:1024*768 resolution or above
z
Video card: 512M Independent graphics or above