Reach Technology SLCD+ Manual Download Page 6

0.3. 

Software License Agreement 

 

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT CAREFULLY BEFORE 
DOWNLOADING OR USING THE SOFTWARE .  
 
This License Agreement (“Agreement”) is a legal contract between you (either an individual or a 
single business entity) and Reach Technology Inc.  (“Reach”) for software referenced in this 
guide, which includes computer software and, as applicable, associated media, printed materials, 
and “online” or electronic documentation (the “Software”). 
 
BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE, YOU AGREE 
TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO 
THE TERMS OF THIS AGREEMENT, DO NOT INSTALL OR USE THE SOFTWARE. IF 
YOU HAVE PAID A FEE FOR THIS LICENSE AND DO NOT ACCEPT THE TERMS OF 
THIS AGREEMENT, REACH WILL REFUND THE FEE TO YOU PROVIDED YOU (1) DO 
NOT INSTALL THE SOFTWARE AND (2) RETURN ALL SOFTWARE, MEDIA AND 
OTHER DOCUMENTATION AND MATERIALS PROVIDED WITH THE SOFTWARE TO 
REACH TECHNOLOGY INC AT: REACH TECHNOLOGY INC., 4575 CUSHING 
PARKWAY, FREMONT, CALIFORNIA 94538. 
 
Reach Technology Inc. ("Reach") and its suppliers grant to Customer ("Customer") a 
nonexclusive and nontransferable license to use the Reach software ("Software") in object code 
form on one or more central processing units owned or leased by Customer or otherwise 
embedded in equipment provided by Reach. 
  
EXCEPT AS EXPRESSLY AUTHORIZED ABOVE, CUSTOMER SHALL NOT: COPY, IN 
WHOLE OR IN PART, SOFTWARE OR DOCUMENTATION; MODIFY THE SOFTWARE; 
REVERSE COMPILE OR REVERSE ASSEMBLE ALL OR ANY PORTION OF THE 
SOFTWARE; OR RENT, LEASE, DISTRIBUTE, SELL, OR CREATE DERIVATIVE WORKS 
OF THE SOFTWARE.  
 
Customer agrees that aspects of the licensed materials, including the specific design and structure 
of individual programs, constitute trade secrets and/or copyrighted material of Reach. Customer 
agrees not to disclose, provide, or otherwise make available such trade secrets or copyrighted 
material in any form to any third party without the prior written consent of Reach. Customer 
agrees to implement reasonable security measures to protect such trade secrets and copyrighted 
material. Title to Software and documentation shall remain solely with Reach. 
  
SOFTWARE LIMITED WARRANTY. Reach warrants that for a period of ninety (90) days from 
the date of shipment from Reach: (i) the media on which the Software is furnished will be free of 
defects in materials and workmanship under normal use; and (ii) the Software substantially 
conforms to its published specifications. Except for the foregoing, the Software is provided AS 
IS. This limited warranty extends only to Customer as the original licensee. Customer's exclusive 
remedy and the entire liability of Reach and its suppliers under this limited warranty will be, at 
Reach's option, repair, replacement, or refund of the Software. In no event does Reach warrant 
that the Software is error free or that Customer will be able to operate the Software without 
problems or interruptions. 
 

SLCD+ Controller Manual V1.1 

8/14/2009 

Page 6 

Summary of Contents for SLCD+































Reviews: