Appendix B - Parts and suppliers for SLCD+ controller
connections
B.1
Connectors and cables for J6, J10
The board connector is Molex type 53261-0890 (J6) and 53261-0490 (J10). The mating
connector is made of two parts: a receptacle housing and crimp pins. A special tool is
needed to make the crimps. Alternatively, custom cables can be purchased. See B.3 for
cable vendors.
J6, J5 Receptacle housing Molex P/N 51021-0800
J4 Receptacle housing Molex P/N 51021-0300
J10 Receptacle housing Molex P/N 51021-0400
Crimp pins Molex 50079 or 50058
Prototype (small qty) crimp tool Molex 63811-0200
Production crimp tool Molex 63811-0000
All of the above are available from www.digikey.com
B.2
Cables for J7, J9
These connectors attach to flat flex cables that then attach to the display unit. These
cables can be ordered from either
B.3
Discrete wire cable vendors
The cables needed for any of the 1.25mm cables can be specified and supplied as
assembled cables by:
or
Interconnect Marketing Solutions
SLCD+ Controller Manual V1.1
8/14/2009
Page 26
