24
CONFIGURE U
X
BUS \ SE
TTINGS
SETTINGS / ZONES / DEHUMIDIFIER / CONFIGURE UxBUS / SETTINGS
CONFIGURATION SETTINGS 1
General configuration on the selected UxBUS:
Cool supply temp: It sets the flow temperature for the summer season.
Heat supply temp: It sets the flow temperature for the winter season.
Room flowrate: It sets the room inlet air flow.
Summer flowrate: It sets the room inlet air flow.(*)
Winter flowrate: It sets the room inlet air flow. (*)
(*) only for UAP 200
UxBUS_02 UC12
Configuration
Cool supply temp:25.0
°c
Heat supply temp:21.0
°c
Room flowrate:040%
CONFIGURATION SETTINGS 2
General configuration on the selected UxBUS:
Fresh air Flow: It sets the fresh air ventilation flow.
Fresh cool flow: It sets the free cooling flow.
Boost flowrate: It sets the fresh flow in boost mode.
Boost delay: Time of delay for shutting down the boost feature after the input stops.
UxBUS_02 UC12
Configuration
Fresh air Flow:120m3/h
Fresh cool flow:050%
Boost flowrate :050%
Boost delay :001min
CONFIGURATION SETTINGS 3
General configuration on the selected UxBUS:
Delta cool Int.: It sets the delta temperature from the set flow for the summer
integration.
Delta Heat Int.: It sets the delta temperature from the set flow for the winter integration.
Enable valve: It enables the 0-10 output to control the optional valve on the water
circuit.
Summer Integration temp: Summer integration temperature (only display).(*)
Winter Integration temp: Summer integration temperature (only display).(*)
(*) only for UAP and DA
UxBUS_02 UC12
Configuration
Delta cool Int.:06.0
°c
Delta Heat Int.:10.0
°c
Enable valve:NO
UAP OUTPUT SETTINGS
General configuration on the selected UxBUS:
Output Summer Flow: It sets the flow rate of the exhaust fan in winter running.
Output Winter Flow: It sets the flow rate of the exhaust fan in summer running.
UxBUS_01 UC12
Configuration
Out Sum flow: 130 m3/h
Out Win flow: 130 m3/h
SETTINGS FROM PERCENTAGE
General configuration on the selected UxBUS:
Temp. Est. Rin: Summer fresh air ventilation temperature
Perc.Vent.Ric.: Recirculation fan percentage .
Perc.Vent.Rin: Renewal fan percentage.
Perc.Vent.Esp: Exhaust fan percentage.
UxBUS_01 UC12
Configuration
Sum.Ren.Temp :25.0
°c
Perc.Rec.Flow:040%
Perc.Ren.Flow:040%
Perc.Exp.Flow:040%
TIMEOUT UNIT
General configuration on the selected UxBUS:
TimeOut: It sets the TimeOut of the unit communication. Time over for the unit to
turn off its functionality if it does not communicate with the central unit any longer.
Configuration
Unit TimeOut
TimeOut: 000 sec
──────────────────────
Default TimeOut for
UxBUS
