Page 5 of 15
5. Switching the unit OFF
To switch the unit OFF press
button and hold it for 2 seconds while the unit is running. The display will look like:
standby mode:
,
URGENT NEED OF HOT WATER!
5. “Boost mode”
.
While the heat pump is running, press this button
to turn ‘ON’ “Boost mode”. The heater icon
will be shown,
and the electrical heater will work according to the control program together with the compressor until the set temperature is
reached.
FLEXIBLE USAGE OF YOUR APPLIANCE!
6. Timer setting
- After switching the appliance on, press and hold
button for 5 seconds to enter the timer setting interface, the timer
on icon
and hour icon “88:” will flash together;
- Press the
and
buttons to set the exact hour(s).
- Press
button to transfer to minute setting, minute icon “:88” will flash, press the
and
buttons to set the exact
minute(s).
- Press
button again to transfer to timer off setting, the timer off icon
and hour icon “88:” will flash together.
- Press the
and
buttons to set the exact hour(s).
- Press
button to transfer to minute setting, minute icon “:88” will flash, press the
and
buttons to set the exact
minute(s).
- Press
button again to save and exit the timer setting interface.
Press
button to cancel the timer, while the “timer setting” mode is active!!!
NOTE:
1) The timer ‘ON’ and timer ‘OFF’ functions can be set at the same time.
2) The timer settings are repeating.
3) The timer settings are still valid after a sudden power cut.
