Page 3 of 15
OPERATING MODES. USER INTERFACE
- Display Symbol
- Button symbol
Press
and
buttons at the same time and hold for 5 seconds, the buttons are locked.
Press
and
buttons at the same time and hold for 5 seconds again, the buttons are unlocked
3 EASY STEPS TO START USING YOUR APPLIANCE
1. Switching ‘ON’
When connecting the appliance to the main power supply, all icons are displayed on the controller screen for 3
seconds. After that an initial check is undergoing. If everything is ok, the unit enters into a standby mode:
standby mode:
2. Clock setting
Clock setting:
- After switching the appliance on, press
button to entry the clock setting interface, hour and minute icons “88:88”
flash together;
- Press
button to switch hour/minute setting, press the
and
buttons to set the exact hour(s) and minute(s);
- Press
button again to confirm and exit.
DOWN adjust button
Clock/Timer setting button
Set button
UP adjust button
Unit ‘ON’/’OFF’
Electrical heater
‘ON’/’OFF’ button
