1 - Overview
1.6.4
The MAIN screen page (multi-tank operation - Apollo only)
The instrument will always default to the MAIN screen on startup. The MAIN screen
differs from that for single tank operation only in the respect of there being a separate
screen page for each tank or hopper enabled (fig. 4), and also a screen page which
shows the application rates for all tanks - the "multi-tank" page (fig. 5).
The text line at the top of the screen indicates which tank/product the screen
information is referring to.
Individual tank - display and settings
Press the MAIN menu key repeatedly to cycle between the MAIN screen pages
for each tank.
You can independently set the target rate, application mode (AUTO or MAN) and alter
the target rate (AUTO mode) or actual application rate (MAN mode) for each tank,
Multi-tank display and settings
From the "multi-tank" page you can alter the target rate simultaneously for all tanks
set for AUTO (fig. 5) by pressing the arrow keys. All rates will change by the same
increment (default = 5%).
The target rate from each tank is displayed by the graphic. If the
application rate from an individual tank has been adjusted above or below the target
rate, then that target rate will be flashing on the "multi-tank" page. Note that in this
example, tanks 3 and 4 do not show a target rate because they are set to MAN
mode.
Pressing the key will reset all tank rates to their respective pre-programmed
target rates.
Figure 4
The MAIN screen page with
multiple "tanks" enabled
Figure 5
The multi-tank" MAIN screen
Current Tank / Product Selected
9
