6
5
4
9
8
7
3
2
1
0
*
6
5
4
9
8
7
3
2
1
0
*
x1
x1
x6
x2
x2
x2
x2
x1
x1
x1
Fig. 6 Marking Out Mounting Position. The supplied bracket
allows easy marking out before drilling and mounting the
keypad. Drill the cable clearance hole in the center of the
rectangular aperture. (All screws and wall plugs are supplied.)
You will need a No.2 Philips head screwdriver, a drill and a
pencil
.
Fig. 3 Items Supplied with 9325i. If any items are
missing or damaged, please contact your vendor.
Fig. 5 Assembling the 9325i Keypad. The cable should be
connected as described in the instructions on page 1. A
choice of silicone seal is provided depending on the
diameter of the cable used. The cable clamp is screwed
down to hold the cable firmly at the back of the keypad.
©2010 RUTHERFORD CONTROLS INT’L CORP. WWW.RUTHERFORDCONTROLS.COM
USA: 2697 INTERNATIONAL PARKWAY, PKWY 5, VIRGINIA BEACH, VA 23452 • CANADA: 210 SHEARSON CRESCENT, CAMBRIDGE, ON N1T 1J6
PHONE • 1.800.265.6630 • 519.621.7651 • FAX: 1.800.482.9795 • 519.621.7939 • E-MAIL: [email protected]
9325 Keypad Installation Instructions
(Continued)
6
5
4
9
8
7
3
2
1
0
*
x1
x1
x2
x1
x2
x1
Fig. 4 Items Supplied with 9325e. If any items are
missing or damaged, please contact your vendor.
9325i Interior Keypad
9325e Weatherproof or Exterior Keypad
9325e is a sealed unit
and cannot be opened.
2
Silicone Seal
Rear view of
keypad
Step 1
Step 2
Step 3
