RCF UP 9501 User Manual Download Page 35

Page: 35 / 40

ENGLISH

DATA LINK

- 1 RS485 EUROBLOCK connector

- 2 RCF FLEXCOM BUS EUROBLOCK connectors

ELECTRICAL SPECS.

- Operating voltage:

- Max. consumption (power):

- Operating temperature:

- Relative humidity:

MECHANICAL SPECS.

- Dimensions (w, h, d):

- Net weight:

115/230 V ac (50-60 Hz), 48 V dc
800 W
–5 ÷ +50 °C (23 ÷ 122 °F)
20 ÷ 90% (non-condensing)

485 mm, 88 mm, 365 mm (19” rack - 2 units)
7.8 kg (UP 9501), 8.0 kg (UP 9502), 8.3 kg (UP 9504)

APPENDIX

DXT 9000 - COMPLIANCE OPTION LIST WITH EN 54-16 REQUIREMENTS

7.3

Audible warning

7.6.2

Manual silencing of the voice alarm condition

7.7.2

Manual reset of the voice alarm condition

7.8

Output to fire alarm devices

8.3

Indication of faults related to the transmission path to CIE

Disablement condition

10.

Voice alarm manual control

11.

Interface to external control device(s)

12.

Emergency microphone(s)

13.14 Redundant power amplifiers

Summary of Contents for UP 9501









































Search results

Summary of Contents for UP 9501

Reviews:

Related manuals for UP 9501

Brands by name

Popular brands

RCF UP 9501, User Manual

Search results

Summary of Contents for UP 9501

Reviews:

Related manuals for UP 9501

Brands by name

Popular brands