RCF P3108 User Manual Download Page 12

12

ENGLISH

RCF S.p.A. thanks you for purchasing this product, which has been designed to 

guarantee reliability and high performance. 

DESCRIPTION

P series loudspeakers belong to the ‘RCF ACUSTICA’ line for fixed installation.
The model P 3108 can be installed outdoor, with IP 55 protection, if adapted as a sealed box.
This is a two-way loudspeaker providing wide dispersion, high power input rate and efficiency.
Its cabinet is made of UV stabilized plastic resin and its shape allows both single installation and 
arrays / clusters (with optional accessories). The front grille is in custom perforated aluminium with 
open-cell fibre water repellent woven fabric backing.
Each cabinet is equipped with four M 8 brass inserts and a stainless steel U-Bracket.
The front logo is in aluminium and can be rotated.
Connections to an amplifier are made through a watertight connector.

The  high  frequency  section  has  a  constant  directivity  horn  with  a  1”  RCF  Precision  Neodymium 
compression driver (1.5” diaphragm).
The low-frequency transducer is a 8” woofer (2.5” voice coil).

SEALED OR VENTED 

(BASS-REFLEX) BOX

As  factory  default,  P  3108  is  a  vented  box  (bass-
reflex), yet it can be adapted as a sealed box (in order 
to get IP 55 protection) by proceeding as follows:

Take  off  the  loudspeaker  front 
grille by removing the six screws.
Cover  the  reflex  port  (the  hole) 
by  using  the  dedicated  plug 
(to  be  fixed  with  thread-forming 
screws).
Re-mount the loudspeaker grille.

SINGLE LOUDSPEAKER INSTALLATION

Loudspeakers are to be install by qualified personnel, respecting all safety standards.
Loudspeakers are to be installed securely.
Make sure the support structure (walls / ceilings) has the necessary mechanical  characteristics for 
the loudspeaker weight, without the risk of a fall that could damage things or cause an injury.
Use attachments elements suitable for walls / ceilings (e.g. screw anchors for bricks, screw anchors 
for concrete, etc.).

A

F

B

C

D

G

E

Summary of Contents for P3108

















Reviews: