RCF AX 8042, User Manual

Page: 24 / 48

24
ENGLISH
AUTOMIXER
Click AUTOMIX SETUP in the main window.
AM1 ON : toggles the automixer no.1 (keep it on if used).
AM2 ON : toggles the automixer no.2 (keep it on if used).
MAX NOM1 : sets the maximum number of open channels simultaneously
(assigned to the automixer no.1 and with NOM 1 activated).
MAX NOM2 : sets the maximum number of open channels simultaneously
(assigned to the automixer no.2 and with NOM 2 activated).
n
ote
: maX nom
is a limitation that may force off input channels
(
even if signals are detected at
their inputs
),
when the maximum limit of open channels is reached in the respective automixer
.
Important: in the MIXER MATRIX section, it is necessary to assign all matrix
nodes (input / output combinations) to one of the two automixers.
For each input (MASTER or SLAVE):
NOM1 : (when lit) assigns the channel to the automixer no.1 open input count.
NOM2
: (when lit) assigns the channel to the automixer no.2 open input count.
PRIORITY FUNCTION (‘DUCKING’)
This function allows to get automatic level attenuation of one or more audio inputs when
a signal is detected (through the noise gate) at the input with the highest priority level.
It is necessary to enable the noise gate (NSGT) in all audio inputs that are
controlled by the ‘ducking’ priority function and properly set the THRESHOLD
of each single channel (in addition to the general threshold of the DUCKING
window).
The priority level, from 0 (lowest) to 5 (highest), is set in each input channel by PRIORITY
parameters.
Between 2 (or more ) inputs having the same same priority level, the one with the lowest
channel number gets the priority.
Click DUCKING in the main window.
The T HRESHOLD fader refers to only one audio input, the one with the
highest priority among all those simultaneously open (in which audio
signals are above their noise gate threshold) and sets the threshold above which
that input gets the priority over all the others.
RANGE : adjusts the attenuation to apply to all inputs with lower priority level
when ‘ducking’ priority is in progress.
Attack
: adjusts the priority function attack time.
Release
: adjusts the priority function release time.
DUCK
: toggles the ‘ducking’ function for the respective input (MASTER or SLAVE).
PRIORITY FUNCTION
(‘DUCKING’)
AUTOMIXER